This is something I get asked about a lot. How can I roll a custom Network Video Recorder (NVR) that will accept any camera and not be cloud dependent. Well, any camera that adheres to standards such as RTSP and ONVIF. I will be discussing BlueIris here but there are other options. This is in no way an endorsement. Same thing for the hard drives and cameras. This is all simply gear I use.
This is another one of those questions that gets asked all the time. What are the pros and cons of these various technologies and which is best? Well first of all there isn’t a “best” for everyone nor is there a reason you have to ONLY stick with one throughout your house. Many times a mixing of protocols is best. In this post I’m going to attempt to break down the pros/cons of each one to help better educate your buying decisions.
These are going to be generic, it’s possible a specific product may not quite slot into this list. My hope is that you can use it as a starting point though. Alright so let’s break things down and take a look at the good and bad of each protocol!
I’ve seen this topic come up quite a bit recently and thought I would give some insights. How can you automatically pop a camera feed into Kodi on motion? And how can you have it disappear after a few seconds?
As it turns out this is pretty simple, and should be doable from your home automation platform of choice. All you need it a way to capture camera motion events and act on them. I’ve also added a virtual switch so I can disable the alerts.
This comes up time and time again on the Home Automation subreddit. How do I lay out wiring and all to make automation as simple as possible in the future? This post will try to address these items and give suggestions for easy, inexpensive things you can do while building for maximum flexibility!